Added to your cart

Your cart is empty.

Technical specifications
Multi-controller
MC3100ZB

Dimensions

Height:
101.6 mm (4 in)
Width:
101.6 mm (4 in)
Depth:
27.25 mm (1.07 in)

Compatibility

The multi-controller can interact with:
Compatible
platforms

Compatible with:

Neviweb
Hubitat

logo-neviweb
logo Hubitat

Possible use

The multi-controller can be connected to several types of wired devices to control certain appliances such as:

  • Window
  • Door
  • Wine cellar
  • Commercial refrigerators and freezers
  • Alarm system

Features

The MC3100ZB multi-controller has the following features:

  • Possibility to integrate the device with several home automation systems 
  • Possibility to connect different devices through the outputs of the multi-controller 
  • Possibility to connect an external temperature sensor* in the device
  • Different types of power supply possible for the multi-controller
  • Up to 4 devices can be connected to the multi-controller

Neviweb features:
  • When connected via Zigbee protocol to a Sedna** water damage protection system and wired to an alarm panel***, the MC3100ZB allows to:

    • Activate a zone on the alarm panel that will notify the central alarm station when water is detected.

    • Close the Sedna water valve when arming the alarm system. 

  • See which input(s) and output(s) are on 
  • Possibility to have access to internal and external**** temperature and humidity readings 
  • Create automations that run based on time, sunrise/sunset, device action, or your presence 
  • Trigger actions based on your presence with geofencing
* Sensor not included
** Only compatible with VA4220WF and VA4221WF valves
*** Requires a Zigbee compatible alarm system
**** Requires the AC1310-01 sensor (sold separately)
Connectivity
requirements

Requires:

  • Sedna smart water valve or GT130 gateway
  • Permanent Internet connection
  • Smartphone or tablet
  • Neviweb App available on App Store and Google Play

Power supply mode

In power supply mode, the multi-controller acts as a bridge so that devices connected to the output respond to events triggered by devices connected to the input.

Note: In battery mode, the device acts as a Zigbee end device and will not repeat any messages over the network.*

*Requires 2 AA lithium batteries (not included)

Power sources

3 possible power sources:

  • Power supply connector:
     
    • 12 Vdc 35 mA
    • 24 Vdc 20 mA
    • 24 Vac 15 mA

  • USB Micro B – 5 Vdc 65 mA

  • 2 AA lithium batteries (5 years)*
*Power supply and batteries not included

Temperature ranges

Operating temperature
0 °C to 40 °C (32 °F to 104 °F)

Temperature reading (internal)
0 °C to 40 °C (32 °F to 104 °F)

Temperature reading (external)
-40 °C to 70 °C (-40 °F to 158 °F)

*Temperature accuracy: 0.5 °C

Humidity reading

5% to 95% non-condensing
*Humidity accuracy: 4.5 %

Inputs/outputs

Two inputs:

  • 1 isolated input ideal for any 12 V to 24 V signal)
  • 1 dry contact compatible input (3.3 Vdc, 1 mA source)

Two outputs:

  • Dry contact only (up to 24 V / 1A max.)
Mc3100Zb Zigbee Multi-controller - Sinopé

Communication
protocole

Zigbee 3.0
Frequency: 2.4 GHz
Transmission power: +20 dBm
Receiver sensitivity: -108 dBm

In the box

  • 1 multi-controller
  • Installation guide – French version
  • Installation guide – English version
  • 2 mounting screws

Warranty

3-year limited warranty

Version

North-American