Height: 12.2 cm (4.8 in)

Width: 7.2 cm (2.88 in)

Depth: 2.6 cm (1.02 in) + 0.76 cm (0.3 in)

The low voltage smart thermostat – Control4– 24 Vac is designed to control heating devices such as:

• Baseboard heater activated by an electronic relay (SSR)
• Baseboard heater activated by a mechanical relay
• Fan-forced convector
• Electric floor heating (activated by a relay)
• Hydronic floor heating
• Hydronic heating system
• Furnace (without fan control)

Cannot be used with:

• Air conditioning system
• Heat pump

* The installation requires the presence of 3 wires: supply, load and common.

The low voltage smart thermostat for Control 4 has the following features:

• Second output allowing the control of an auxiliary heating device
• Floor or ambient temperature control*
• Temperature control while taking into account another control mode
• Selection of the length of the control cycle according to the type of load connected to the thermostat
• Protection of the pump of a hydronic system during long periods of inactivity
• Control with your smartphone, tablet or computer**
• Can be voice controlled with  Alexa (Amazon Echo)
• Integrates with personalized scenes**
• Outdoor temperature display*
• Detection of the connected load
• Lockable buttons**
• Temperature display in Celsius or Fahrenheit
• Backlit display

*Floor sensor not included. Compatible with the Sinopé floor heating sensor or 10K and 12K sensors at 25 ° C.

Requires:

• Control4 controller

24 Vac

1 Amp

Setpoint: 5 °C to 30 °C (41 °F to 86 °F)

Display: 0 °C to 70 °C (32 °F to 99 °F)

± 0.5 °C (± 1 °F)

-20 °C to 50 °C (-4 °F to 122 °F)

1 Amp

Zigbee 3.0 profile

Frequency: 2.4 GHz

Transmission power: +20 dBm

Receiver sensitivity: -108 dBm

3 years

• TH1400ZB-C4 low voltage smart thermostat
• Installation guide – English version
• Installation guide – French version
• Installation template
• 2 screws

Version